Powercap Infinity Powered Respirator
Powercap® Infinity® combines high efficiency particulate (HEPA) filters with a user-responsive, smart 4-in-1 system offering TH3 protection. Featuring a panoramic visor with EN 166 eye and face protection, the unit is intuitive to use and easy to maintain.
4 in 1 Fully Integrated Protection
1. Head Protection
Built around an EVO®5 Olympus® industrial safety helmet combing a super strong ABS shell for superior all day protection with the comfort of the Evolution 3D-Adjustment harness system.
Conforming to: EN397, ANSI/ISEA Z89.1 ( American standard for head protection, Type 1) and AS/NZS 1801 for Occupational Protective Helmets
2. High Efficiency Filters
High capacity HEPA filters coupled with aerodynamically optimised pre-filter covers ensure the PowerCap® Infinity® delivers 160 litres per minute of clean air to the user with maximum battery efficiency. Filters can be changed easily with the quick-change bayonet system.
PowerCap® Infinity® provides users with clean air to the level of EN12941:1998 + A2:2008 TH3P – The highest possible rating in Europe with an Assigned Protection Factor of 40 and Nominal Protection Factor NPF of 500. ( source EN529)
PowerCap® Infinity® provides users with clear air to the level of AS/NZS 1716:2012 PAPR-P2 with loose fitting head top, with a Minimum Required Protection Factor (MRPF) up to 50.
3. Panoramic Impact Visor
The optical class 1 visor offers impact protection against small objects at speeds of up to 434 Kmph (270 Mph). This test was conducted using a 6mm steel ball bearing. The visor has a replaceable peel-off visor protector to prolong its life.
Conforming to: EN166.1.B, as well as AS/NZS1337.1 Eye & Face Protection, Options O ( Outdoor, un-tinted) V ( High Impacts) and M ( Molten Metal and Hot Solids)
4. Ear Defenders
Developed to seamlessly integrate with Sonis® helmet mounted ear defenders. Designed by the JSP R&D team working with a leading UK acoustic engineering research facility, the Sonis® helmet mounted range peaks at an unbeaten level of 36 SNR.
Conforms to EN353-3, AS/NZS 1270 with Class5 performance for all 3 models. SLC(80) rating from 27dB and up to 34dB
Please note that Sonis® ear defenders are not included with the PowerCap® Infinity®.
5. Perfect Fit to Combat Dust – Prevent Silicosis
Dust in the workplace is a significant issue. HSE figures (2017) show that 18,000 new cases of work related respiratory disease were diagnosed. A significant proportion of these were a result of exposure to silica dust. In October 2018 the ABC published findings (1, 2) of rising silicosis cases in Australia – particularly affecting stonemasons working on kitchen bench tops without adequate respiratory protection. A Queensland based senior occupational physician expected another 300 cases before Christmas 2018 – just over a 2 month period. A video of the report is available for viewing below.
PowerCap® Infinity® being a loose fitting PAPR, it removes the need for face fit testing by ensuring that a high volume of clean air is delivered to the breathing zone giving a superior level of protection.
JSP tested the effect of facial hair on the mask seal and found that facial hair does not impede the effectiveness of the PowerCap® Infinity®.
Note the PowerCap® Infinity® is suitable for Trimmed Beard, however a “Ned Kelly” or “ZZ Top” type of Beard is not acceptable!
NO FACE FIT TEST REQUIRED, No need to shave everyday.
Older technology based RPE products require clean shaven face fit test to conform to worksafe standards,
- Fully integrated PAPR-P2 powered air respirator
- 4 in 1 protection
- High capacity HEPA filters
- Panoramic impact visor
- Compatible with JSP Sonis® ear defenders and JSP EVO® 5 hard hat
- 8 hours of battery life
- Easy disassembly, cleaning and maintenance
- Loose fitting PAPR = No need to face fit test
- Loose fitting PAPR = Unaffected by facial hair
- APPROVAL: AS/NZS 1716:2012, AS/NZS 1337.1, AS/NZS 1801
- Item Code: CEA646-001-1AN (BLACK)
PowerCap® Infinity® is intended for use in areas where respiratory protection from dust, spores, mist and fumes, head protection from falling
objects and eye/face protection from high-speed particles is required.
PowerCap® Infinity® provides respiratory protection to the requirements of EN12941 as a TH3P R SL device. PowerCap® Infinity® has a
nominal protection factor of 500 and a UK assigned protection factor (APF) of 40. Note that in EU states the APF varies.
PowerCap® Infinity® provides head protection to the requirements of EN397, ANSI Z89.1, CSA Z94.1 and GB2811. The head protection
offers protection from falling objects. As part of the PowerCap® Infinity®, some aspects of the performance of the helmet are affected. It should
not be used in sub 5°C temperatures.
PowerCap® Infinity® provides eye protection to the requirements of EN166 against high speed particles, Grade B. The PowerCap® Infinity®
has a face seal skirt to provide both respiratory protection and Field of Use Class 4 protection against dust particles. PowerCap® Infinity® is a
loose fitting item of respiratory protection. It may offer respiratory protection to the wearers of prescription eye wear.
PowerCap® Infinity® also has the facility to be able to accept the JSP Sonis® helmet mounted hearing protection to provide protection against
the harmful effects of noise.